How to install iBaby M2C on an Android Devices

Please turn off your mobile data and follow the steps below to reset and install iBaby M2C.

Step 1:
1. Connect your smart device to your 2.4 GHz Wi-Fi connection
2. Open the settings app and make sure your location is turned on
3. Plug the power adapter into your iBaby M2C

Step 2:
1. Make sure the LED (status) light on your iBaby M2C is flashing red
2. Tap on “Next Step”
3. When prompted to, enter your home Wi-Fi Password

Step 3: 
1. Your iBaby M2C is installing -
Please do not unplug or disconnect your smart device from your Wi-Fi connection.

Installation failed? Reset your device: 
Reset your monitor by holding the reset button for 15 seconds. Then reinstall your monitor following the on-screen instructions.