Before Setup
Please double check that you have the following before we start the setup process:
- iBaby monitor power cord (please do not use other power cords)
- A genuine Apple cable
- Confirm you are connecting to a 2.4GHz network with WPA/WPA2 protocol. iBaby monitors will not work with WEP protocol.
Before installing your iBaby monitor connect your phone to the Wi-Fi network you want iBaby to connect to.
*Most our users report better performance when paired to 2.4GHz network.The optimal location for your monitor is on the same floor as your iBaby, less than 15 feet away.
Step 1: Download the iBaby Care App from the App Store
Step 2: Connect your phone to a 2.4 GHz Wi-Fi network
Step 3: Connect your iBaby Monitor to the power adapter provided
Step 4: Connect the monitor to your phone with an OEM Apple cable
Step 5: Two Message Alerts will pop up on your device
- Share Wi-Fi Settings? – Tap Allow
- iBaby Care would like to Communicate with this device – Tap Allow
Step 6: The iBaby Care app will Open on its own
Step 7: If you don’t have an iBaby account, tap Register to create one for free.
Step 8: Choose your iBaby model (product)
Step 9: Follow the on-screen instructions.
Comments
0 comments
Please sign in to leave a comment.